Custom Concrete in Dripping Springs, TX
San Marcos Custom Concrete designs and pours concrete in Dripping Springs, TX. We mix good looks with strong, sound work. Our crew pours stamped patios, custom driveways, pool decks, and estate walkways. We serve local shops and homes alike. We have years of hands-on work pouring and finishing concrete in the Texas Hill Country. We know how heat, limestone soil, and seasonal rain wear on concrete over time. Each job in Dripping Springs gets top-grade materials and careful work. The finish holds up under real Hill Country conditions.
Dripping Springs sits in northern Hays County along U.S. Route 290. It lies roughly 25 miles west of Austin. Folks call it the "Gateway to the Hill Country." The city has grown fast. It climbed from 4,650 residents at the 2020 census toward an estimated 10,000-plus today. That growth brings new custom homes, wineries, and event venues. All of them need strong outdoor surfaces. Summers here run hot and humid. The soil is heavy with limestone. Flash floods can hit at times. All of that puts real stress on concrete that was poured poorly.
Frequently Asked Questions
How much does a new concrete driveway cost?
Most driveways in this area run about $7.50 to $11.50 per square foot for plain broom-finish work. A standard two-car drive (400 sq ft) often lands between $3,000 and $4,600 for the pour. We measure your site and give you a firm price in writing.
How thick will the concrete be?
Driveways and patios are poured 4 inches thick in most cases. Heavy truck or RV areas get 5 to 6 inches. We set rebar or fiber mesh in the slab for strength.
How long before I can drive on it?
You can walk on new concrete in about 24 hours. Park cars on it after 7 days. Heavy trucks should wait about 28 days while the slab reaches full strength.
Do you tear out the old concrete?
Yes. We break up and haul the old slab, grade the base, and compact fresh gravel before we pour. Tear-out and haul-off are in the written price.
Will my new concrete crack?
All concrete can crack in time. We cut control joints in the right spots so cracks follow the joints, not the slab face. Good base work and the right mix cut the risk a lot.
How long does a job take?
Most patios take 2 days. Most driveways take 3 days. Large or stamped jobs take 4 to 5 days. Weather can add a day.
What Does My Concrete Project Cost?
Concrete is priced by the square foot of the pour itself — length × width of the slab, driveway, or deck. Here are the ranges we see on real jobs around San Marcos, and a calculator built on the same numbers.
Concrete Driveway
A standard two-car driveway is 20×20 ft — 400 sq ft — and at 4 inches with a plain broom finish it runs about $3,000–$4,600 around San Marcos. Six inches for RVs and work trucks, stamped or exposed finishes, and tearing out the old driveway each move the number up from there. Every price here includes the compacted base — Central Texas clay swells and shrinks with the weather, so the base has to be built right or the slab moves with it.
Concrete Patio
A 20×20 patio at 4 inches, broom finish, runs about $2,400–$4,400. Stamped and exposed-aggregate finishes are the popular upgrades here — they can add half again to the plain price. Six inches goes under hot tubs and outdoor kitchens.
Slabs & Foundations
A two-car garage slab, 24×24 ft at 4 inches, runs $3,744–$5,760. Foundation-grade work — 6 inches, thickened edge, rebar, vapor barrier — prices higher per foot and is the spec a house or addition actually needs.
Pool Decks
Pool decks price like patios with three additions: coping edges at the water, drains that move splash water away, and a slip-resistant finish. A 400 sq ft deck runs about $2,600–$4,600 in a broom finish; cool-deck coatings and stamped finishes sit above that.
Repair & Resurfacing
Small concrete work is priced by the visit more than the square foot. Replacing one cracked or heaved section runs $11–$19 per sq ft with the demo of that section included; resurfacing a sound slab runs $3.50–$6.50. If a section has sunk, heaved, or cracked clean through, resurfacing is paint on a problem — we'll say so at the look.
What Moves the Price
- Finish. Plain broom is the baseline. Stamped, exposed aggregate, and stained finishes add materials and skilled labor — stamped work can run close to double a plain pour.
- Thickness. Four inches is standard for cars and foot traffic. Six inches — for RVs, work trucks, hot tubs — uses half again as much concrete on every square foot.
- Tear-out. Breaking out and hauling off old concrete is its own line, priced per square foot on top of the new pour.
- Job size. Small pours carry a minimum charge and short-load fees from the concrete plant; on big pours the setup spreads over more feet.
- Ground. Central Texas clay swells when it is wet and shrinks hard in a drought, and that movement cracks slabs that were poured on a thin base. Base work is in every price here — it is not an extra.
Where these numbers come from. Published Central Texas cost guides — Angi's Austin slab and driveway guides, HomeBlue's San Marcos slab guide, BuildX Pro's Austin driveway data, and Austin contractor pricing guides — gathered November 2026, on top of the national guides (HomeGuide, Angi, Fixr) behind the fleet concrete card. The full research note is on file with the site records.
A note on materials. These ranges figure a standard 4-inch pour of 3,500-psi concrete on a compacted base, broom finish. Decorative finishes — stamped, exposed aggregate, stained — add materials and skilled labor, and 6-inch work uses half again as much concrete on every square foot. Tell us what the slab has to carry and we'll confirm the spec and the exact price at the in-person estimate, before any work starts.
Estimate Your Project
A standard 2-car driveway is 20×20 ft = 400 sq ft; 24×24 = 576.
Sections poured in one visit share a single minimum charge.
A 20×20 patio is 400 sq ft; 10×20 = 200.
Sections poured in one visit share a single minimum charge.
A 2-car garage is 24×24 ft = 576 sq ft; a house slab is often 1,200–2,000.
Foundation-grade includes a thickened perimeter edge, rebar, and a vapor barrier — that's the spec, not an upsell.
Measure the deck band around the pool — most home decks run 300–600 sq ft.
Sections poured in one visit share a single minimum charge.
Pool decks get a slip-resistant finish and slope away from the water — both are in these numbers.
For a section replacement, measure the section itself. For resurfacing, measure the whole surface.
Sections done in one visit share a single minimum charge.
Resurfacing only works on a slab that's still sound underneath. If a section has heaved, sunk, or cracked clean through, replacement is the honest fix — we'll tell you which one yours is at the in-person look.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to San Marcos Custom Concrete
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the yard. Prefer to talk? Call (830) 582-9453.
Why Choose Our San Marcos Concrete Contractors?
Quality, Durability, and Craftsmanship
We do not cut corners on the basics. A sound mix, proper steel, sealer, and time to cure. Those steps are in every job, not sold as extras. They are what keep concrete from cracking and shifting on our clay soils.
Community Reputation and Customer Satisfaction
We are a local crew serving Dripping Springs, not a traveling outfit. If a job fails early, we hear about it at the grocery store. So we build it to hold up, not just to look good at completion.
Request a FREE Quote.
Call for a free estimate. We give you the numbers straight, with no pressure either way.
Commercial and Residential Concrete Design Services in Dripping Springs, TX
San Marcos Custom Concrete designs concrete surfaces in Dripping Springs. We serve shops and stores first, then homes. Our crew pairs solid build know-how with fine finish work. The result looks sharp and lasts.
Commercial Concrete Design and Installation
Wineries, event venues, and retail shops in Dripping Springs count on our crew. We plan each layout around drainage, foot traffic, and long-term wear. We do that before any concrete is poured on site. Managers and builders work closely with us. That keeps business jobs on schedule. Dozens of business installs across Hays County back up this work.
Stamped and Textured Decorative Concrete Builds
Stamped concrete lets Dripping Springs properties copy natural stone, brick, or slate. It costs less than the real materials. Our crew picks patterns based on each property's style. We do that before work begins. We apply color hardeners and release agents mid-pour. They add depth and texture. Timing during the pour is key. Good timing makes a clean stamped finish. Poor timing makes a patchy one.
Multi-Zone Outdoor Living Slabs and Patios
Multi-zone slabs split outdoor space into clear areas. One zone is for dining. One is for lounging. One is for cooking. All sit in one smooth pour. Our crew grades each zone on its own. That handles drainage and keeps the surface looking like one piece. We place expansion joints with care. Dripping Springs heat swings can crack a slab without them. Homeowners with outdoor kitchens or fire features ask for this layout most often.
Custom Inlay, Medallion, and Decorative Accent Work
Custom inlays and medallions form focal points in driveways and courtyard slabs. You will see them in entryways across Dripping Springs. Our crew cuts stencils or uses stamped mats. We form compass roses, family crests, or clean borders. Accent bands frame these features. They draw the eye toward the entry. Detail work like this sets custom homes apart from standard tract-home concrete.
Premium Concrete Products and Finish Systems for Dripping Springs Properties
San Marcos Custom Concrete uses top-grade materials and finish systems. They are made for Hill Country heat and humidity. We match each finish system to the wear a surface will face.
High-Gloss Sealer and Matte Finish Options
High-gloss and matte sealers serve different needs. The right pick depends on the look you want and the grip you need. High-gloss sealers deepen color. They suit covered patios that sit out of direct sun. Matte finishes cut glare. They improve grip around pool decks and walkways in Dripping Springs. Our crew suggests a system only after we check sun exposure and foot traffic.
Custom Color Blending and Multi-Tone Pigment Work
We use integral pigments and surface-applied color hardeners together. They create custom, multi-tone finishes for each property. We test color mixes on sample boards first. No full pour happens on a Dripping Springs job site before that test. Layered work builds depth. Flat, single-color concrete just cannot match it. Earth-tone blends stay a popular pick. They fit the local limestone and native plants.
Durable Topcoat Systems for Outdoor Surfaces
Topcoat systems guard against UV rays and moisture. They keep decorative concrete working through Texas summers and winters. Polyurethane and acrylic topcoats suit different sun levels and uses. Each fits certain Dripping Springs properties. A fresh topcoat on schedule protects the concrete below it. It guards against long-term wear and cracking. A well-kept topcoat can add several years to a surface's usable life.
Luxury Homeowner and Custom Estate Concrete Services in Dripping Springs
San Marcos Custom Concrete builds top-grade surfaces for custom estate homes in Dripping Springs. We use the same business-grade standards we use on shop and store jobs. Fast growth in the area has brought many high-end homes. They need concrete that matches their quality.
High-End Residential Driveways and Courtyards
We pour wide, reinforced driveways and courtyards for estate homes. These homes have gated entries and multi-car garages. Slope, drainage, and load all shape the layout. We weigh all three before any work starts. Decorative borders and stamped accents tie the surfaces in. They match the home's broader style. Many estate driveways in Dripping Springs exceed 2,000 square feet of finished surface.
Custom Pool Decks and Outdoor Entertainment Areas
We build pool decks with textured, slip-resistant finishes. They suit bare feet and steady moisture all year. Outdoor kitchens, fire pits, and shaded lounge zones come together in one pour. Cool-touch coatings go on by request. They keep deck surfaces comfortable in peak summer heat. Outdoor living work like this is now standard on newer Dripping Springs estate builds.
Estate Walkways and Landscape Feature Concrete
We pour winding walkways and landscape borders. They tie concrete in with native Hill Country plants and limestone features. We shape curves and grade changes with care. That way paths drain well during heavy Central Texas rain. Exposed aggregate finishes blend natural stone texture into the walkway itself. Landscape concrete ties a whole estate together. It links the front gate to the backyard.
Warranty Coverage, Aftercare, and Long-Term Concrete Performance
San Marcos Custom Concrete backs each project with clear warranty terms. We also give dependable aftercare support to Dripping Springs clients. Property owners deserve trust in their investment. That trust should last long after the final pour.
Workmanship Warranty and Material Performance Terms
Each pour comes with a workmanship warranty. It covers defects in our work and early surface failure. Sealers, pigments, and topcoat products carry their own warranties. Those come from the makers and cover defects in the material itself. We document project materials and dates. If a warranty claim comes up, it moves fast. Dripping Springs clients get this paperwork at the end of the job. They keep it for their own records.
Sealing, Recoating, and Surface Maintenance
We reseal and recoat decorative surfaces on a set schedule. The schedule depends on sun exposure and daily traffic. Regular resealing protects color pigments from UV fading. That fading is common under intense Texas summer sun. Pressure washing and deep cleaning also help. They keep surfaces looking fresh between full recoat cycles. Most clients across Dripping Springs schedule resealing every two to three years, depending on use.
Crack Repair and Preventive Upkeep
We repair hairline cracks and joint gaps fast. Small issues can grow into big structural problems. We inspect expansion joints and control joints for wear at each upkeep visit. Sealing after minor cracking stops water from getting in. Water is what leads to worse cracking later on. A homeowner who catches cracking early can often avoid a full slab replacement down the road.