Custom Concrete in Lockhart, TX

San Marcos Custom Concrete delivers custom concrete in Lockhart, TX. We build driveways, patios, and decorative outdoor features that hold up for decades. We work with business owners and homeowners across Caldwell County. We pour everything from parking pads to backyard patios with the same care. Our crew brings years of hands-on work with driveway installation and stamped patio design. We also build rural slabs. Each project gets built right the first time. You may need a home concrete driveway or a decorative patio. You may need a heavy-duty pad for farm gear. Either way, our team handles the job from grading through final sealing.

Lockhart sits about 30 miles south of Austin along US Highway 183. Its humid climate brings hot summers and mild, wet winters. They put real stress on outdoor concrete, with average highs near 80 degrees. Roughly 34 inches of rain spreads across the year. Driveways and patios here need proper drainage and steel to avoid cracking. The city's housing stock mixes older homes from the mid-1900s with a wave of new construction. Many properties still include rural acreage suited to farm slab work. San Marcos Custom Concrete is licensed and insured. We build each project to withstand Central Texas heat, rainfall, and clay-heavy soil.

Frequently Asked Questions

How much does a new concrete driveway cost?

Most driveways in this area run about $7.50 to $11.50 per square foot for plain broom-finish work. A standard two-car drive (400 sq ft) often lands between $3,000 and $4,600 for the pour. We measure your site and give you a firm price in writing.

How thick will the concrete be?

Driveways and patios are poured 4 inches thick in most cases. Heavy truck or RV areas get 5 to 6 inches. We set rebar or fiber mesh in the slab for strength.

How long before I can drive on it?

You can walk on new concrete in about 24 hours. Park cars on it after 7 days. Heavy trucks should wait about 28 days while the slab reaches full strength.

Do you tear out the old concrete?

Yes. We break up and haul the old slab, grade the base, and compact fresh gravel before we pour. Tear-out and haul-off are in the written price.

Will my new concrete crack?

All concrete can crack in time. We cut control joints in the right spots so cracks follow the joints, not the slab face. Good base work and the right mix cut the risk a lot.

How long does a job take?

Most patios take 2 days. Most driveways take 3 days. Large or stamped jobs take 4 to 5 days. Weather can add a day.

What Does My Concrete Project Cost?

Concrete is priced by the square foot of the pour itself — length × width of the slab, driveway, or deck. Here are the ranges we see on real jobs around San Marcos, and a calculator built on the same numbers.

Concrete Driveway

A standard two-car driveway is 20×20 ft — 400 sq ft — and at 4 inches with a plain broom finish it runs about $3,000–$4,600 around San Marcos. Six inches for RVs and work trucks, stamped or exposed finishes, and tearing out the old driveway each move the number up from there. Every price here includes the compacted base — Central Texas clay swells and shrinks with the weather, so the base has to be built right or the slab moves with it.

Concrete Patio

A 20×20 patio at 4 inches, broom finish, runs about $2,400–$4,400. Stamped and exposed-aggregate finishes are the popular upgrades here — they can add half again to the plain price. Six inches goes under hot tubs and outdoor kitchens.

Slabs & Foundations

A two-car garage slab, 24×24 ft at 4 inches, runs $3,744–$5,760. Foundation-grade work — 6 inches, thickened edge, rebar, vapor barrier — prices higher per foot and is the spec a house or addition actually needs.

Pool Decks

Pool decks price like patios with three additions: coping edges at the water, drains that move splash water away, and a slip-resistant finish. A 400 sq ft deck runs about $2,600–$4,600 in a broom finish; cool-deck coatings and stamped finishes sit above that.

Repair & Resurfacing

Small concrete work is priced by the visit more than the square foot. Replacing one cracked or heaved section runs $11–$19 per sq ft with the demo of that section included; resurfacing a sound slab runs $3.50–$6.50. If a section has sunk, heaved, or cracked clean through, resurfacing is paint on a problem — we'll say so at the look.

What Moves the Price

  • Finish. Plain broom is the baseline. Stamped, exposed aggregate, and stained finishes add materials and skilled labor — stamped work can run close to double a plain pour.
  • Thickness. Four inches is standard for cars and foot traffic. Six inches — for RVs, work trucks, hot tubs — uses half again as much concrete on every square foot.
  • Tear-out. Breaking out and hauling off old concrete is its own line, priced per square foot on top of the new pour.
  • Job size. Small pours carry a minimum charge and short-load fees from the concrete plant; on big pours the setup spreads over more feet.
  • Ground. Central Texas clay swells when it is wet and shrinks hard in a drought, and that movement cracks slabs that were poured on a thin base. Base work is in every price here — it is not an extra.

Where these numbers come from. Published Central Texas cost guides — Angi's Austin slab and driveway guides, HomeBlue's San Marcos slab guide, BuildX Pro's Austin driveway data, and Austin contractor pricing guides — gathered November 2026, on top of the national guides (HomeGuide, Angi, Fixr) behind the fleet concrete card. The full research note is on file with the site records.

A note on materials. These ranges figure a standard 4-inch pour of 3,500-psi concrete on a compacted base, broom finish. Decorative finishes — stamped, exposed aggregate, stained — add materials and skilled labor, and 6-inch work uses half again as much concrete on every square foot. Tell us what the slab has to carry and we'll confirm the spec and the exact price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project

A standard 2-car driveway is 20×20 ft = 400 sq ft; 24×24 = 576.

Sections poured in one visit share a single minimum charge.

Free — no obligation. Your calculator numbers ride along with the request.

Why Choose Our San Marcos Concrete Contractors?

Quality, Durability, and Craftsmanship

Mix, steel, sealer, cure — we build all four into every job from the start. Skip one and the slab pays for it later. Include them all and the work holds up the way it should.

Community Reputation and Customer Satisfaction

Our customers in Lockhart are our neighbors, and word travels fast in a town this size. We pour every job like we will drive past it for the next twenty years, because we will.

Request a FREE Quote.

Ask us for a free written estimate. You get clear numbers and no sales pressure.

Commercial & Residential Concrete Driveways, Patios, and Outdoor Features in Lockhart, TX

Local businesses and homeowners both trust San Marcos Custom Concrete in Lockhart. We plan and pour driveways, patios, and outdoor slabs suited to Lockhart properties. Each project starts with a site check. Caldwell County's expansive clay soil needs proper base prep before any concrete goes down.

Commercial Parking and Access Concrete for Lockhart Properties

Our team pours business-grade concrete for parking areas, loading zones, and business entrances across Lockhart. Business owners need surfaces rated for heavier vehicle loads. We reinforce each business pour with thicker slabs and steel mesh. San Marcos Custom Concrete schedules business work around operating hours. That limits disruption to daily business. A well-poured business lot can last 25 to 30 years with little upkeep in this climate.

Standard and Decorative Driveway Finish Options

We offer standard broom-finished driveways and decorative options. They suit homeowners who want extra curb appeal. Our crew explains the tradeoffs between exposed aggregate and stamped textures. We also cover smooth troweled finishes before any work begins. Lockhart's clay-rich soil means proper base compaction matters more here than in sandier parts of Texas. On driveways, a stamped finish adds about $4.50 to $6.50 per square foot over a plain broom pour. On patios, the stamped premium runs about $5.00 to $6.50 per square foot.

Backyard Patio Shape, Size, and Slab Design

Our crew designs backyard patios around how a family uses their outdoor space. We do not pour a generic rectangle. We map out grilling zones, seating areas, and walkway links before we pour any patio slab. San Marcos Custom Concrete accounts for drainage slope on each patio. Lockhart's average of 53 rainy days a year makes standing water a real concern. A well-planned patio layout often becomes the most-used space on the property within the first season.

Garage Floor, Shed Pad, and Accessory Structure Slabs

We pour garage floors, shed pads, and slabs for extra structures across Lockhart properties of every size. Our team levels and reinforces each pad to match the weight of what will sit on top of it. San Marcos Custom Concrete pays close attention to moisture barriers on garage floors. Humidity in this region can affect stored gear. A well-poured extra slab prevents the shifting and cracking that plague DIY pours within a few years.

Decorative Concrete Finishes, Stamp Patterns, and Color Systems for Lockhart Homes and Businesses

Businesses that want a distinct storefront entrance turn to San Marcos Custom Concrete. Homeowners who plan a backyard upgrade do the same. They want decorative finishing work. We stock a range of stamp patterns and color systems. They suit business branding and home style alike.

Stamped Pattern Selection and Color Coordination

Our team walks clients through stamp pattern samples. They range from cobblestone to natural stone textures. We show them before anyone commits to a design. We coordinate stamped patterns with existing brick, siding, or landscaping. The finished concrete feels planned, not added on. San Marcos Custom Concrete keeps a physical sample board on hand. Clients see true colors before the pour. Stamped concrete pricing depends on the surface. Stamped patios run $11 to $21 per square foot. Stamped driveways run $12 to $22.50 per square foot, depending on pattern complexity.

Integral Pigment and Acid Stain Application Options

We apply integral pigments, which color concrete all the way through. We also apply acid stains, which react with the surface for a mottled look. Integral color holds up better under heavy foot traffic. Chips and scratches won't reveal a different color beneath it. Acid staining works best for homeowners who want a varied, natural stone look on patios and walkways. Our crew tests stain colors on a sample slab before we apply them to the full project.

Topcoat Sealers for Stamped and Colored Surfaces

We finish each stamped or colored surface with a topcoat sealer rated for UV exposure and Texas heat. Sealed concrete resists fading, staining, and moisture far better than unsealed surfaces in summer sun. San Marcos Custom Concrete suggests resealing decorative concrete every two to three years. That maintains color and shine. A well-kept sealer coat can extend a stamped patio's appearance by a decade or more.

Concrete Solutions for Rural Properties, Farms, and Agricultural Sites Near Lockhart, TX

Farm operations and rural homeowners around Lockhart rely on San Marcos Custom Concrete. We pour slab work built to handle heavy gear and livestock traffic. Caldwell County's farming history means we often pour on properties with acreage well beyond a typical home lot.

Farm Gear Pad and Agricultural Slab Construction

We pour reinforced pads built to support tractors and hay gear. They also support other heavy farm gear without cracking under repeated weight. Our crew works out slab thickness based on the gear a property owner plans to store or operate. San Marcos Custom Concrete uses higher-strength concrete mixes for farm pours than for typical home work. Gear pads built to spec reduce long-term upkeep costs. Gravel or dirt storage areas cost more to keep up.

Rural Driveway and Parking Area Concrete Builds

Our team builds rural driveways built to handle trucks and trailers. Farm vehicles travel in and out daily. We grade long rural driveways with care to manage water runoff across open acreage outside city limits. San Marcos Custom Concrete factors in Lockhart's clay soil expansion when we plan base depth for rural access roads. A well-built rural driveway holds up far longer than compacted gravel under steady vehicle weight.

Barn Approach, Apron, and Livestock Area Slabs

We pour barn aprons, wash areas, and livestock slabs. They handle constant moisture, manure, and heavy animal traffic. Our crew slopes these slabs for proper drainage. Water and waste flow away from structures instead of pooling. San Marcos Custom Concrete uses broom-finished textures on livestock slabs. They prevent slipping in wet conditions. Ranch owners often see barn apron concrete outlast wood or gravel options by 15 years or more.

Concrete Return on Investment and Property Value in Lockhart, TX

Business owners weigh a parking lot upgrade. Homeowners plan a driveway replacement. Both want to know how concrete pencils out. San Marcos Custom Concrete gives each Lockhart client a clear breakdown of costs and returns before work starts.

Concrete Driveway and Patio Impact on Resale Value

New concrete driveways and patios rank among the higher-return exterior upgrades for Lockhart homes headed to resale. Buyers who tour homes in this market often view cracked asphalt or gravel as a costly problem. They see it as a problem waiting to happen. San Marcos Custom Concrete builds surfaces that photograph well and hold up through home inspections. A fresh concrete driveway can recoup 60 to 70 percent of its cost at resale in most Texas markets.

Concrete vs Gravel and Asphalt Cost Comparison

Gravel driveways cost less upfront. But they need regrading and refilling every few years as ruts and washouts form. Asphalt holds up fairly well. But it softens under Lockhart's summer heat and needs resealing every three to five years. Concrete costs more at first than either option. But it needs far less upkeep over a 25-to-30-year lifespan. San Marcos Custom Concrete helps clients compare true long-term cost, not just the first price tag.

Long-Term Durability and Maintenance Cost Savings

Concrete surfaces built by our team in most cases need nothing more than sealing now and then and routine cleaning. They stay in good shape that way. Property owners avoid the repeat regrading, patching, and resurfacing costs that gravel and asphalt demand over time. San Marcos Custom Concrete stands behind each pour with workmanship built for Central Texas soil and weather. Ready to get a quote for your driveway, patio, or farm slab? Reach out to San Marcos Custom Concrete today. We'll schedule a site visit.

Concrete driveway installation in Lockhart, TX

Representative project — an example job priced in researched local ranges. A verified customer job replaces this example as jobs close.

Homeowner: David — Lockhart, TX

The problem: The old drive cracked under his loaded work trailer inside two years.

What David told us: David needed a drive built for trailer weight, not just two cars.

Scope of work: Tore out the cracked drive, compacted a fresh gravel base, and poured a new 6-inch broom-finish drive with rebar on 18-inch centers.

Materials and gear: 4,000 PSI concrete, #3 rebar on 18-inch centers, compacted gravel base. Size: 480 sq ft (20 by 24 ft).

Final price: $7,200. Time on site: 3 days.

Cost note: $15.00 per sq ft.

Outcome: The new drive has not moved under the trailer. David parks on it every night.

📞 Call Now