Custom Concrete in Martindale, TX
San Marcos Custom Concrete brings stamped, stained, and decorative concrete work to property owners across Martindale, TX. Our crew handles everything from textured patios to full driveway resurfacing. We've built a reputation across Caldwell County for strong, attractive work. Martindale sits along the San Marcos River. It is a small community shaped by rural land and older homesteads. New construction is also pushing in from nearby San Marcos.
Central Texas summers bring intense heat and humidity. Heavy rain and flooding near the river also test any concrete surface's drainage and stability at times. That mix makes proper installation, sealing, and finish choice key. It matters for anyone who puts money into decorative concrete here. We're licensed and insured. We know the soil and climate conditions on Martindale properties.
Frequently Asked Questions
How much does a new concrete driveway cost?
Most driveways in this area run about $7.50 to $11.50 per square foot for plain broom-finish work. A standard two-car drive (400 sq ft) often lands between $3,000 and $4,600 for the pour. We measure your site and give you a firm price in writing.
How thick will the concrete be?
Driveways and patios are poured 4 inches thick in most cases. Heavy truck or RV areas get 5 to 6 inches. We set rebar or fiber mesh in the slab for strength.
How long before I can drive on it?
You can walk on new concrete in about 24 hours. Park cars on it after 7 days. Heavy trucks should wait about 28 days while the slab reaches full strength.
Do you tear out the old concrete?
Yes. We break up and haul the old slab, grade the base, and compact fresh gravel before we pour. Tear-out and haul-off are in the written price.
Will my new concrete crack?
All concrete can crack in time. We cut control joints in the right spots so cracks follow the joints, not the slab face. Good base work and the right mix cut the risk a lot.
How long does a job take?
Most patios take 2 days. Most driveways take 3 days. Large or stamped jobs take 4 to 5 days. Weather can add a day.
What Does My Concrete Project Cost?
Concrete is priced by the square foot of the pour itself — length × width of the slab, driveway, or deck. Here are the ranges we see on real jobs around San Marcos, and a calculator built on the same numbers.
Concrete Driveway
A standard two-car driveway is 20×20 ft — 400 sq ft — and at 4 inches with a plain broom finish it runs about $3,000–$4,600 around San Marcos. Six inches for RVs and work trucks, stamped or exposed finishes, and tearing out the old driveway each move the number up from there. Every price here includes the compacted base — Central Texas clay swells and shrinks with the weather, so the base has to be built right or the slab moves with it.
Concrete Patio
A 20×20 patio at 4 inches, broom finish, runs about $2,400–$4,400. Stamped and exposed-aggregate finishes are the popular upgrades here — they can add half again to the plain price. Six inches goes under hot tubs and outdoor kitchens.
Slabs & Foundations
A two-car garage slab, 24×24 ft at 4 inches, runs $3,744–$5,760. Foundation-grade work — 6 inches, thickened edge, rebar, vapor barrier — prices higher per foot and is the spec a house or addition actually needs.
Pool Decks
Pool decks price like patios with three additions: coping edges at the water, drains that move splash water away, and a slip-resistant finish. A 400 sq ft deck runs about $2,600–$4,600 in a broom finish; cool-deck coatings and stamped finishes sit above that.
Repair & Resurfacing
Small concrete work is priced by the visit more than the square foot. Replacing one cracked or heaved section runs $11–$19 per sq ft with the demo of that section included; resurfacing a sound slab runs $3.50–$6.50. If a section has sunk, heaved, or cracked clean through, resurfacing is paint on a problem — we'll say so at the look.
What Moves the Price
- Finish. Plain broom is the baseline. Stamped, exposed aggregate, and stained finishes add materials and skilled labor — stamped work can run close to double a plain pour.
- Thickness. Four inches is standard for cars and foot traffic. Six inches — for RVs, work trucks, hot tubs — uses half again as much concrete on every square foot.
- Tear-out. Breaking out and hauling off old concrete is its own line, priced per square foot on top of the new pour.
- Job size. Small pours carry a minimum charge and short-load fees from the concrete plant; on big pours the setup spreads over more feet.
- Ground. Central Texas clay swells when it is wet and shrinks hard in a drought, and that movement cracks slabs that were poured on a thin base. Base work is in every price here — it is not an extra.
Where these numbers come from. Published Central Texas cost guides — Angi's Austin slab and driveway guides, HomeBlue's San Marcos slab guide, BuildX Pro's Austin driveway data, and Austin contractor pricing guides — gathered November 2026, on top of the national guides (HomeGuide, Angi, Fixr) behind the fleet concrete card. The full research note is on file with the site records.
A note on materials. These ranges figure a standard 4-inch pour of 3,500-psi concrete on a compacted base, broom finish. Decorative finishes — stamped, exposed aggregate, stained — add materials and skilled labor, and 6-inch work uses half again as much concrete on every square foot. Tell us what the slab has to carry and we'll confirm the spec and the exact price at the in-person estimate, before any work starts.
Estimate Your Project
A standard 2-car driveway is 20×20 ft = 400 sq ft; 24×24 = 576.
Sections poured in one visit share a single minimum charge.
A 20×20 patio is 400 sq ft; 10×20 = 200.
Sections poured in one visit share a single minimum charge.
A 2-car garage is 24×24 ft = 576 sq ft; a house slab is often 1,200–2,000.
Foundation-grade includes a thickened perimeter edge, rebar, and a vapor barrier — that's the spec, not an upsell.
Measure the deck band around the pool — most home decks run 300–600 sq ft.
Sections poured in one visit share a single minimum charge.
Pool decks get a slip-resistant finish and slope away from the water — both are in these numbers.
For a section replacement, measure the section itself. For resurfacing, measure the whole surface.
Sections done in one visit share a single minimum charge.
Resurfacing only works on a slab that's still sound underneath. If a section has heaved, sunk, or cracked clean through, replacement is the honest fix — we'll tell you which one yours is at the in-person look.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to San Marcos Custom Concrete
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the yard. Prefer to talk? Call (830) 582-9453.
Why Choose Our San Marcos Concrete Contractors?
Quality, Durability, and Craftsmanship
Some crews sell the basics back to you as upgrades. We do not. The right mix, real reinforcement, sealer, and a full cure are part of the price, because they are part of the job.
Community Reputation and Customer Satisfaction
Reputation is the whole business in Martindale. We work where our customers live, so every slab we pour has to keep proving itself long after the truck leaves.
Request a FREE Quote.
Your estimate is free and in writing, with honest numbers you can plan around.
Stamped, Stained, and Custom Decorative Concrete Services
Businesses across Martindale rely on us first for strong decorative surfaces. Then we turn to homeowner requests. Business property managers often need stamped or stained concrete. It must withstand heavy foot traffic and still look polished for customers. Our crew handles business walkways and home patios. We give the same attention to pattern alignment and finish quality. San Marcos Custom Concrete treats each Martindale project as a chance to build a surface that lasts decades, not years.
Stamped Patio, Driveway, and Pool Deck Construction
We pour and stamp patios, driveways, and pool decks built to handle Martindale's heat. They also handle occasional flooding near the river. Our team picks pattern depth and texture based on how the surface will be used day to day. Rural properties around Martindale often need wider driveway stamping. It matches longer entry roads and open acreage. We finish each stamped surface with a texture that resists slipping, even when wet.
Acid and Water-Based Stain Application on New Slabs
Acid staining reacts with fresh concrete. It produces marbled, varied color that never fades in an even way. Our crew also applies water-based stains. Those give property owners more predictable, uniform color results. San Marcos Custom Concrete tests stain samples on-site. Martindale clients can see the actual finish before full application. Humidity levels in Central Texas affect drying time. We adjust application schedules around current weather conditions.
Decorative Border, Inlay, and Pattern Accent Work
Border and inlay work frames a slab with contrasting color, texture, or pattern. It creates a finished, planned look. We design custom inlays for driveway entries, pool surrounds, and patio edges across Martindale properties. Rural estates often ask for stone-look borders. They echo the natural landscape around the home. Our team hand-tools each accent line. That keeps edges crisp and even across the whole surface.
Decorative Concrete Products, Sealers, and Finish Systems in Martindale, TX
Business clients in Martindale often ask about sealer systems that cut upkeep costs over a property's life. San Marcos Custom Concrete sources dry-shake hardeners, integral color additives, and UV-resistant sealers. They are built for Central Texas conditions. Each finish system we suggest accounts for sun exposure and seasonal rainfall. It also accounts for the traffic load each surface will handle.
Integral Color and Dry-Shake Hardener Options
Integral color mixes pigment right into wet concrete. It produces even color all the way through the slab. Dry-shake hardeners get spread onto the surface before stamping. They add color depth and surface density. Our crew suggests dry-shake hardener for driveways and high-traffic business walkways around Martindale. San Marcos Custom Concrete matches color options to existing home exteriors or business branding when clients ask.
Stamp Pattern and Template Selection Process
Choosing a stamp pattern starts with a review of texture samples. The samples should match a property's building style or landscape style. We walk Martindale clients through slate, wood-plank, cobblestone, and ashlar-cut template options. We do that before pouring begins. Our team weighs slab size and shape when we suggest pattern scale. Oversized patterns can look awkward on smaller patios. Template selection in most cases takes one on-site meeting before we finalize the project design.
UV-Resistant Sealer Systems for Outdoor Surfaces
UV-resistant sealers protect stamped and stained concrete from fading. Intense Central Texas sun causes that fading. San Marcos Custom Concrete applies sealer coats that also resist moisture damage. That matters with seasonal flooding near the San Marcos River. Our crew chooses between solvent-based and water-based sealers. The choice depends on the surface's sun exposure and expected foot traffic. Well-sealed concrete in Martindale in most cases holds its color and finish for three to five years before resealing.
Martindale, TX Homeowners and Property Owners Choosing Custom Concrete
Investment property owners and small business operators across Martindale often reach out to us before homeowners do. Our team still treats each home driveway or patio project with the same care. We apply that same care to larger business jobs. San Marcos Custom Concrete has poured decorative surfaces for rural acreage, established neighborhoods, and newer projects that spread out from San Marcos.
Residential Patio and Driveway Custom Finish Projects
Homeowners across Martindale ask for stamped patios and stained driveways. They want to boost curb appeal without a full remodel. Our crew checks existing landscaping, drainage slope, and sun exposure. We do that before we suggest pattern or color options. San Marcos Custom Concrete completes most home patio projects within three to five working days, weather permitting. We coordinate pour schedules around Central Texas rain patterns. That avoids delays or surface defects.
Rural Property Concrete Upgrades and Feature Builds
Rural Martindale properties often need long driveway approaches or gear pads. They may need decorative walkways that connect outbuildings to the main house. Our team accounts for uneven terrain and drainage challenges. They are common on larger acreage parcels. San Marcos Custom Concrete has poured feature walkways that link barns, guest houses, and river-adjacent patios across the area. Rural clients in most cases ask for broom-finish or light stamping. That keeps surfaces practical under heavy gear traffic.
Investment and Resale Property Decorative Concrete Work
Investment property owners choose decorative concrete to raise resale value. They do it without a full landscaping overhaul. Our crew suggests cost-effective stamped overlays for older slabs that still have structural life left. San Marcos Custom Concrete has helped Martindale property owners raise listing appeal. Updated driveway and patio finishes do the work. A refreshed decorative surface often becomes one of the first features buyers notice during a walkthrough.
Decorative Concrete Warranty, Aftercare, and Reseal Services
San Marcos Custom Concrete stands behind each decorative surface we pour in Martindale. We serve business and home clients alike. Our warranty and upkeep programs protect the investment owners make in stamped, stained, or colored concrete. Property owners across Martindale can count on us for reseal scheduling long after the first pour.
Workmanship and Color Warranty Coverage Terms
We back each stamped and stained project with a workmanship warranty. It covers cracking, delamination, and poor installation issues. Color warranty terms vary. They depend on whether integral color, dry-shake hardener, or surface staining was used. Our team documents each Martindale project's finish specs. Warranty claims then move fast if problems arise. San Marcos Custom Concrete reviews warranty coverage with clients in writing before any project begins.
Resealing and Color Refresh Service Schedule
Sealer coats on Martindale properties in most cases need a fresh coat every three to five years. The timing depends on sun and rain exposure. Our crew inspects existing sealer condition before we suggest a full reseal or a lighter upkeep coat. Color refresh services restore faded stamped or stained surfaces. They do it without a full slab replacement. San Marcos Custom Concrete schedules reseal visits around seasonal weather windows. That guarantees proper cure time.
Surface Cleaning and Preventive Maintenance Program
Regular cleaning removes dirt, algae, and mineral deposits. They build up faster near Martindale's river-adjacent properties. Our team suggests pressure washing at a controlled PSI. That avoids damage to stamped texture or stained color layers. Upkeep visits catch small cracks or sealer wear early. Small issues can turn into costly repairs. San Marcos Custom Concrete offers upkeep plans that bundle cleaning, inspection, and resealing into one scheduled visit.