Custom Concrete in New Braunfels, TX

San Marcos Custom Concrete is your provider of custom concrete services in New Braunfels, TX. We bring over 20 years of experience. We craft fine decorative concrete features. Our skilled team transforms driveways, patios, pool decks, and business properties across Comal County. We are a fully licensed and insured concrete contractor. We focus on stamped concrete, stained concrete, and custom flatwork. Our work lifts curb appeal and property value.

New Braunfels sits along the Comal and Guadalupe Rivers. It enjoys a humid climate that is ideal for outdoor living and entertaining. From the historic Gruene district to the Schlitterbahn water park, this community of 90,000 takes pride in its rich German heritage. It also has a thriving tourism industry. San Marcos Custom Concrete helps homeowners and businesses make the most of the Texas Hill Country lifestyle. We build strong, low-upkeep concrete surfaces. They last as long as New Braunfels itself.

Frequently Asked Questions

How much does a new concrete driveway cost?

Most driveways in this area run about $7.50 to $11.50 per square foot for plain broom-finish work. A standard two-car drive (400 sq ft) often lands between $3,000 and $4,600 for the pour. We measure your site and give you a firm price in writing.

How thick will the concrete be?

Driveways and patios are poured 4 inches thick in most cases. Heavy truck or RV areas get 5 to 6 inches. We set rebar or fiber mesh in the slab for strength.

How long before I can drive on it?

You can walk on new concrete in about 24 hours. Park cars on it after 7 days. Heavy trucks should wait about 28 days while the slab reaches full strength.

Do you tear out the old concrete?

Yes. We break up and haul the old slab, grade the base, and compact fresh gravel before we pour. Tear-out and haul-off are in the written price.

Will my new concrete crack?

All concrete can crack in time. We cut control joints in the right spots so cracks follow the joints, not the slab face. Good base work and the right mix cut the risk a lot.

How long does a job take?

Most patios take 2 days. Most driveways take 3 days. Large or stamped jobs take 4 to 5 days. Weather can add a day.

What Does My Concrete Project Cost?

Concrete is priced by the square foot of the pour itself — length × width of the slab, driveway, or deck. Here are the ranges we see on real jobs around San Marcos, and a calculator built on the same numbers.

Concrete Driveway

A standard two-car driveway is 20×20 ft — 400 sq ft — and at 4 inches with a plain broom finish it runs about $3,000–$4,600 around San Marcos. Six inches for RVs and work trucks, stamped or exposed finishes, and tearing out the old driveway each move the number up from there. Every price here includes the compacted base — Central Texas clay swells and shrinks with the weather, so the base has to be built right or the slab moves with it.

Concrete Patio

A 20×20 patio at 4 inches, broom finish, runs about $2,400–$4,400. Stamped and exposed-aggregate finishes are the popular upgrades here — they can add half again to the plain price. Six inches goes under hot tubs and outdoor kitchens.

Slabs & Foundations

A two-car garage slab, 24×24 ft at 4 inches, runs $3,744–$5,760. Foundation-grade work — 6 inches, thickened edge, rebar, vapor barrier — prices higher per foot and is the spec a house or addition actually needs.

Pool Decks

Pool decks price like patios with three additions: coping edges at the water, drains that move splash water away, and a slip-resistant finish. A 400 sq ft deck runs about $2,600–$4,600 in a broom finish; cool-deck coatings and stamped finishes sit above that.

Repair & Resurfacing

Small concrete work is priced by the visit more than the square foot. Replacing one cracked or heaved section runs $11–$19 per sq ft with the demo of that section included; resurfacing a sound slab runs $3.50–$6.50. If a section has sunk, heaved, or cracked clean through, resurfacing is paint on a problem — we'll say so at the look.

What Moves the Price

  • Finish. Plain broom is the baseline. Stamped, exposed aggregate, and stained finishes add materials and skilled labor — stamped work can run close to double a plain pour.
  • Thickness. Four inches is standard for cars and foot traffic. Six inches — for RVs, work trucks, hot tubs — uses half again as much concrete on every square foot.
  • Tear-out. Breaking out and hauling off old concrete is its own line, priced per square foot on top of the new pour.
  • Job size. Small pours carry a minimum charge and short-load fees from the concrete plant; on big pours the setup spreads over more feet.
  • Ground. Central Texas clay swells when it is wet and shrinks hard in a drought, and that movement cracks slabs that were poured on a thin base. Base work is in every price here — it is not an extra.

Where these numbers come from. Published Central Texas cost guides — Angi's Austin slab and driveway guides, HomeBlue's San Marcos slab guide, BuildX Pro's Austin driveway data, and Austin contractor pricing guides — gathered November 2026, on top of the national guides (HomeGuide, Angi, Fixr) behind the fleet concrete card. The full research note is on file with the site records.

A note on materials. These ranges figure a standard 4-inch pour of 3,500-psi concrete on a compacted base, broom finish. Decorative finishes — stamped, exposed aggregate, stained — add materials and skilled labor, and 6-inch work uses half again as much concrete on every square foot. Tell us what the slab has to carry and we'll confirm the spec and the exact price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project

A standard 2-car driveway is 20×20 ft = 400 sq ft; 24×24 = 576.

Sections poured in one visit share a single minimum charge.

Free — no obligation. Your calculator numbers ride along with the request.

Why Choose Our San Marcos Concrete Contractors?

Quality, Durability, and Craftsmanship

A slab is only as good as what goes under and into it. We spec the mix for the load, place the steel where it works, seal the surface. We let it cure — every time, on every job.

Community Reputation and Customer Satisfaction

We are a local crew serving New Braunfels, not a traveling outfit. If a job fails early, we hear about it at the grocery store. So we build it to hold up, not just to look good at completion.

Request a FREE Quote.

Call for a free estimate. We give you the numbers straight, with no pressure either way.

Stamped, Stained, and Decorative Concrete Installation in New Braunfels, TX

San Marcos Custom Concrete brings your vision to life. We offer a wide selection of decorative concrete options. Stamped concrete copies the beauty of natural stone, brick, or wood. It costs a fraction of the price. Acid stains and water-based stains add rich, soft color. The color won't chip, flake, or peel. From earth tones to vivid hues, our crew handcrafts outdoor living spaces that stand out.

Stamped Concrete Patios, Driveways, and Pool Decks

We focus on stamped concrete for hardscapes that make a strong mark in New Braunfels. Pick from dozens of patterns that mimic flagstone, cobblestone, and more. The patterns fit your style. Stamped overlays refresh old surfaces for a fast upgrade. You skip full replacement costs. Around saltwater pools, stamped concrete won't corrode or shift. Pavers do both over time.

Acid Stain and Water-Based Stain Floor Finishes

Our acid stain and water-based stain work creates one-of-a-kind marbled color on any concrete surface. Acid staining soaks in and reacts with the concrete. The results are permanent and UV-stable. They hold up in Texas heat. Water-based stains offer easier color matching. They also give bolder effects for business and home spaces alike. Both deliver a strong sealed finish. It protects your investment for years.

Colored Concrete and Custom Pattern Design Options

San Marcos Custom Concrete offers many options for color. We use integral color, dry-shake hardeners, and surface-applied stains. Our team helps you pick stamp patterns and color schemes. They should fit any building style in New Braunfels. From Mediterranean to midcentury modern, we capture the look you want with care. You can personalize your space further. Add custom scoring, decorative borders, and inset design features.

Decorative Concrete Products, Sealers, and Finish Quality Standards in New Braunfels

San Marcos Custom Concrete uses only top products and proven methods. Each finish comes out clean and even. Our staff picks the right mix design, pigments, stamp mats, and sealants for your project. We take precise impressions. We hand-detail edges and joints. We apply even coats for solid, long-lasting results. Each job meets our strict quality standards before we call it complete.

Integral Color, Dry-Shake, and Surface Stain Options

We offer the full range of decorative concrete coloring methods for properties across New Braunfels. Integral pigments put color through the whole slab. Results stay even if the surface chips. Dry-shake color hardeners strengthen the surface. They add rich, uniform tones at the same time. Our team guides you to the right coloring method for your space and budget.

Stamp Pattern Libraries and Custom Template Selection

Our team gives you access to a large library of stamp patterns. They come from top makers like Proline and Matcrete. For truly one-of-a-kind looks, we create custom molds. We build them to your exact specs and preferences. From Mediterranean tile to Texas star motifs, we carry a stamp for each design vision. Our crew picks the best grout width and depth. The texture looks authentic and natural.

UV-Resistant Topcoat Sealers for Decorative Surfaces

New Braunfels averages 226 sunny days per year. UV protection is a key part of any decorative concrete finish. We use industrial-grade sealers with UV inhibitors. They prevent color fading and yellowing under the harsh Texas sun. Our staff reapplies tinted or clear sealant at set intervals. Your surface keeps a like-new sheen season after season. Regular resealing also locks in color. It repels oil, food, and outdoor stains with ease.

Concrete Solutions for Restaurants, Hotels, and Retail Businesses in New Braunfels, TX

San Marcos Custom Concrete partners with New Braunfels businesses. We create strong first impressions that drive foot traffic. From porte cochères to outdoor gathering spaces, our decorative concrete helps restaurants, hotels, and retail stores stand out. We work closely with property managers, business owners, and builders. We deliver the right look on spec and on budget. Our business crews can handle projects of any scale across Comal County.

Restaurant Patio and Outdoor Dining Concrete Features

We help New Braunfels eateries expand and upgrade outdoor dining spaces. We use strong, attractive concrete finishes. Stamped concrete defines dining zones on multi-use patios. It gives a polished, finished look that guests notice right away. Stenciled patterns and custom scoring boost brand identity. You skip expensive tile or stone installs. Our team schedules work off-hours. That cuts disruption to your restaurant's daily work and revenue.

Hotel Pool Deck and Courtyard Concrete Construction

Our crews install concrete pool decks, courtyards, and entryways for New Braunfels hotels and resorts of all sizes. Stamped concrete adds natural grip around water features. Guest safety is the top priority there. Integral color matches your brand palette with care. Exposed aggregate gives an upscale, resort-quality touch. We handle new builds, full renovations, and phased expansions. Each gets equal care and skill.

Retail Storefront Walkway and Entry Concrete Work

San Marcos Custom Concrete boosts curb appeal and foot traffic in New Braunfels. We install eye-catching retail concrete across the city. Stamped concrete entryways make a strong brand statement. They draw customers in before they reach your door. ADA-compliant ramps, landings, and wide walkways keep your storefront safe and accessible. They keep it code-compliant at all times too. We phase all work with care. Your retail doors stay open. Your business keeps running without a break.

Decorative Concrete ROI and Property Value in New Braunfels, TX

New Braunfels has a robust tourist economy. It also sits in a sought-after spot between Austin and San Antonio. Property values here have climbed 40% over the last five years. Decorative concrete upgrades help owners get the most resale value. They also help owners command premium rental rates in a tough market. Dollar for dollar, quality concrete work offers higher returns than most other exterior upgrades.

Stamped Concrete Value vs Natural Stone and Pavers

We deliver the prestige of natural stone and pavers at 50–70% less in total installed cost. That is for New Braunfels property owners. Stamped concrete needs no mortar joints. Those joints can crack, shift, or fill with weeds over time. Integral color won't flake away. Painted or surface-coated products do flake with age. With basic upkeep, stamped concrete keeps its beauty and strength for decades. It does so without major repair costs.

Curb Appeal Improvements That Drive Buyer Interest

Our stained concrete driveways and decorative walkways create a polished sense of arrival. They suit any New Braunfels property. Quality hardscaping can lift appraised property values by 10–20%. That is according to real estate industry data. We help you pick colors and patterns with the broadest buyer appeal. That supports stronger offers at resale. In New Braunfels' tough market, timeless concrete looks beat trendy finishes when it matters most.

Vacation Rental and Short-Term Property Upgrade Value

New Braunfels attracts 3 million visitors each year. Short-term rental upgrades are one of the smartest investments local owners can make. Our strong decorative concrete surfaces help Airbnb and VRBO properties earn five-star reviews. They do it through lasting looks and easy upkeep. Stain-resistant treatments keep pool decks and outdoor lounges looking clean. They hold up after heavy guest use, weekend after weekend. Tinted sealers can restore a worn surface in a single weekend. They refresh your listing photos and boost your nightly rate.

Concrete slab installation in New Braunfels, TX

Representative project — an example job priced in researched local ranges. A verified customer job replaces this example as jobs close.

Homeowner: James — New Braunfels, TX

The problem: The shed sat on blocks and the floor stayed damp after rain.

What James told us: James wanted the shed dry and level so he could store tools year round.

Scope of work: Poured a level slab for a storage shed, with a thickened edge and a smooth trowel finish.

Materials and gear: 4,000 PSI concrete, rebar edge, gravel base. Size: 200 sq ft (10 by 20 ft).

Final price: $1,900. Time on site: 2 days.

Cost note: $9.50 per sq ft.

Outcome: The slab cured flat and dry. James moved his tools in the next week.

📞 Call Now