Custom Concrete in Uhland, TX
San Marcos Custom Concrete builds custom concrete slabs and foundations in Uhland, TX. We also build structural flatwork for property owners across the area. Our crew handles everything from monolithic slabs to raised foundations. We build farm pads and workshop floors for business operations and homes alike. We've spent years pouring concrete in the Texas-German belt region. That work shows in each foundation, garage slab, and barn pad we complete. You may run a business or manage a farm. You may own a home in Uhland. Either way, our team delivers structural concrete that meets code. It holds up to Central Texas soil conditions.
Uhland sits in eastern Hays County and northwestern Caldwell County. It is a rural stretch of Central Texas. Clay-heavy soil and hot summers put real demands on concrete work here. The city's population has climbed past 1,800 residents in recent years. Much of that growth includes country homes, farm outbuildings, and small workshops. All of them need solid foundations. Summers here often push past 95 degrees. The region sees its share of heavy spring rain. Proper vapor barriers and structural steel aren't optional extras. San Marcos Custom Concrete is licensed and insured. We build each slab to withstand the shifting clay soil common across Uhland and greater Caldwell County.
Frequently Asked Questions
How much does a new concrete driveway cost?
Most driveways in this area run about $7.50 to $11.50 per square foot for plain broom-finish work. A standard two-car drive (400 sq ft) often lands between $3,000 and $4,600 for the pour. We measure your site and give you a firm price in writing.
How thick will the concrete be?
Driveways and patios are poured 4 inches thick in most cases. Heavy truck or RV areas get 5 to 6 inches. We set rebar or fiber mesh in the slab for strength.
How long before I can drive on it?
You can walk on new concrete in about 24 hours. Park cars on it after 7 days. Heavy trucks should wait about 28 days while the slab reaches full strength.
Do you tear out the old concrete?
Yes. We break up and haul the old slab, grade the base, and compact fresh gravel before we pour. Tear-out and haul-off are in the written price.
Will my new concrete crack?
All concrete can crack in time. We cut control joints in the right spots so cracks follow the joints, not the slab face. Good base work and the right mix cut the risk a lot.
How long does a job take?
Most patios take 2 days. Most driveways take 3 days. Large or stamped jobs take 4 to 5 days. Weather can add a day.
What Does My Concrete Project Cost?
Concrete is priced by the square foot of the pour itself — length × width of the slab, driveway, or deck. Here are the ranges we see on real jobs around San Marcos, and a calculator built on the same numbers.
Concrete Driveway
A standard two-car driveway is 20×20 ft — 400 sq ft — and at 4 inches with a plain broom finish it runs about $3,000–$4,600 around San Marcos. Six inches for RVs and work trucks, stamped or exposed finishes, and tearing out the old driveway each move the number up from there. Every price here includes the compacted base — Central Texas clay swells and shrinks with the weather, so the base has to be built right or the slab moves with it.
Concrete Patio
A 20×20 patio at 4 inches, broom finish, runs about $2,400–$4,400. Stamped and exposed-aggregate finishes are the popular upgrades here — they can add half again to the plain price. Six inches goes under hot tubs and outdoor kitchens.
Slabs & Foundations
A two-car garage slab, 24×24 ft at 4 inches, runs $3,744–$5,760. Foundation-grade work — 6 inches, thickened edge, rebar, vapor barrier — prices higher per foot and is the spec a house or addition actually needs.
Pool Decks
Pool decks price like patios with three additions: coping edges at the water, drains that move splash water away, and a slip-resistant finish. A 400 sq ft deck runs about $2,600–$4,600 in a broom finish; cool-deck coatings and stamped finishes sit above that.
Repair & Resurfacing
Small concrete work is priced by the visit more than the square foot. Replacing one cracked or heaved section runs $11–$19 per sq ft with the demo of that section included; resurfacing a sound slab runs $3.50–$6.50. If a section has sunk, heaved, or cracked clean through, resurfacing is paint on a problem — we'll say so at the look.
What Moves the Price
- Finish. Plain broom is the baseline. Stamped, exposed aggregate, and stained finishes add materials and skilled labor — stamped work can run close to double a plain pour.
- Thickness. Four inches is standard for cars and foot traffic. Six inches — for RVs, work trucks, hot tubs — uses half again as much concrete on every square foot.
- Tear-out. Breaking out and hauling off old concrete is its own line, priced per square foot on top of the new pour.
- Job size. Small pours carry a minimum charge and short-load fees from the concrete plant; on big pours the setup spreads over more feet.
- Ground. Central Texas clay swells when it is wet and shrinks hard in a drought, and that movement cracks slabs that were poured on a thin base. Base work is in every price here — it is not an extra.
Where these numbers come from. Published Central Texas cost guides — Angi's Austin slab and driveway guides, HomeBlue's San Marcos slab guide, BuildX Pro's Austin driveway data, and Austin contractor pricing guides — gathered November 2026, on top of the national guides (HomeGuide, Angi, Fixr) behind the fleet concrete card. The full research note is on file with the site records.
A note on materials. These ranges figure a standard 4-inch pour of 3,500-psi concrete on a compacted base, broom finish. Decorative finishes — stamped, exposed aggregate, stained — add materials and skilled labor, and 6-inch work uses half again as much concrete on every square foot. Tell us what the slab has to carry and we'll confirm the spec and the exact price at the in-person estimate, before any work starts.
Estimate Your Project
A standard 2-car driveway is 20×20 ft = 400 sq ft; 24×24 = 576.
Sections poured in one visit share a single minimum charge.
A 20×20 patio is 400 sq ft; 10×20 = 200.
Sections poured in one visit share a single minimum charge.
A 2-car garage is 24×24 ft = 576 sq ft; a house slab is often 1,200–2,000.
Foundation-grade includes a thickened perimeter edge, rebar, and a vapor barrier — that's the spec, not an upsell.
Measure the deck band around the pool — most home decks run 300–600 sq ft.
Sections poured in one visit share a single minimum charge.
Pool decks get a slip-resistant finish and slope away from the water — both are in these numbers.
For a section replacement, measure the section itself. For resurfacing, measure the whole surface.
Sections done in one visit share a single minimum charge.
Resurfacing only works on a slab that's still sound underneath. If a section has heaved, sunk, or cracked clean through, replacement is the honest fix — we'll tell you which one yours is at the in-person look.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to San Marcos Custom Concrete
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the yard. Prefer to talk? Call (830) 582-9453.
Why Choose Our San Marcos Concrete Contractors?
Quality, Durability, and Craftsmanship
Shortcuts show up a year later as cracks. That is why our standard pour already includes the things that prevent them. A sound mix, proper reinforcement, sealer, and curing done with patience.
Community Reputation and Customer Satisfaction
Our customers in Uhland are our neighbors, and word travels fast in a town this size. We pour every job like we will drive past it for the next twenty years, because we will.
Request a FREE Quote.
Ask us for a free written estimate. You get clear numbers and no sales pressure.
Concrete Slabs, Foundations, and Structural Flatwork for Uhland, TX Properties
San Marcos Custom Concrete pours structural flatwork in Uhland. We serve business sites and homes across the area. Below, we break down the foundation types and slab uses. We also cover the material standards that keep each project code-compliant.
Monolithic Slab and Raised Foundation Options
Our team pours monolithic slabs and raised foundations. The pick depends on soil conditions and drainage needs. Monolithic slabs combine the footing and floor into a single pour. That speeds up construction and reduces joint failure points. Raised foundations lift the structure above grade. They are a common choice for properties near Plum Creek or other low-lying sections of Uhland. We check each site's drainage pattern and soil type before we suggest a foundation type for your project.
Residential and Agricultural Outbuilding Slab Pours
We pour slabs for home additions, farm outbuildings, and mixed-use rural structures across Uhland. Barns, gear sheds, and detached garages all need slabs built for their load needs. A generic thickness will not do. Our crew works out expected weight loads from vehicles, livestock, or stored gear. We do that before we finalize the pour specs. San Marcos Custom Concrete matches each outbuilding slab to the structure's planned use and long-term strength needs.
Garage, Carport, and Storage Structure Concrete Slabs
Garage, carport, and storage slabs need careful attention to thickness and drainage slope. They also need the right surface finish. We grade each slab to direct water away from the structure. That prevents pooling during Central Texas storms. Storage buildings that house gear or vehicles need higher-PSI mix designs than a standard carport floor. Our crew walks each site in advance. We confirm the slab size, slope, and finish match your planned use.
Structural Concrete Mix, Rebar, and Foundation Material Standards
We follow strict material standards for each structural concrete mix, rebar layout, and foundation pour in Uhland. Our crew picks mix designs based on soil bearing capacity, expected loads, and moisture exposure at each site. Rebar spacing follows planned layouts rather than guesswork. That keeps each foundation code-compliant. San Marcos Custom Concrete documents material specs for each pour. Property owners have a clear record of what went into their foundation.
High-PSI Structural Mix Design for Foundations and Reinforced Slabs in Uhland
Our team designs concrete mixes around PSI ratings that match each structure's load and moisture exposure. This section covers mix strength, rebar placement, and vapor barrier work for foundations and structural slabs.
High-PSI Mix Design for Foundation and Structural Slabs
We use high-PSI mix designs for foundations and structural slabs that carry heavy or sustained loads. Standard home slabs in most cases call for 3,000 PSI concrete. Foundations under heavier structures often need 4,000 PSI or higher. Our crew picks the mix strength based on project specs, soil bearing tests, and the structure's planned use. San Marcos Custom Concrete never defaults to a one-size mix. Uhland's clay soil demands site-specific math.
Rebar Placement, Spacing, and Cover Block Standards
Our crew places rebar per planned spacing charts. We don't eyeball distances between bars. Cover blocks keep steel lifted to the correct height within the pour. That prevents rust and early cracking. Foundation plans in most cases call for rebar spaced twelve to eighteen inches apart. The right spacing depends on load needs. We inspect each rebar grid before the pour begins. We confirm placement matches the approved structural plan.
Vapor Barrier and Moisture Control Integration
We install vapor barriers beneath each foundation slab. They block ground moisture from moving into the concrete. Uhland's clay-heavy soil retains water after rain. Moisture control is a key step here, not an optional upgrade. Our crew seams and seals the barrier material. That prevents gaps where vapor could still pass through. San Marcos Custom Concrete treats vapor barrier work as a required standard, not an add-on service.
Uhland, TX Rural and Agricultural Property Concrete Services
San Marcos Custom Concrete serves rural businesses, farm operations, and country homeowners across Uhland. We build slabs for working properties. Our crew knows the load demands of farm gear, livestock structures, and workshop floors.
Country Home Foundation and Slab Construction
Our crew builds foundations and slabs for country homes across Uhland's rural acreage. Properties set back from Highway 21 often face longer utility runs and unique grading challenges. In-town lots are simpler. We account for septic system placement, well locations, and driveway access when we plan foundation layout. San Marcos Custom Concrete coordinates each rural pour around the property's existing systems. That avoids costly rework.
Agricultural Barn Pad and Gear Storage Slabs
We pour barn pads and gear storage slabs built to handle tractors, trailers, and heavy farm gear. Farm slabs need higher strength than typical home flatwork. Repeated heavy-vehicle traffic demands it. Our team grades these pads to shed water fast. Standing water damages both the slab and stored gear. San Marcos Custom Concrete has poured barn pads across Caldwell County. Our clients range from small hobby farms to working cattle ranches.
Rural Business and Workshop Concrete Floor Projects
Our crew pours workshop and rural business floors built for gear, foot traffic, and daily wear. Workshop slabs often need control joints spaced closer together. That reduces cracking under vibration from gear. We finish these floors with a broom or trowel texture. The pick depends on whether the space handles vehicles or precision work. San Marcos Custom Concrete builds rural business floors that hold up under years of heavy, steady use.
Foundation Permits, Engineering Compliance, and Structural Standards in Uhland
San Marcos Custom Concrete handles permits and code compliance for structural pours across Uhland, TX. Our team manages submissions, plan reviews, and inspection scheduling. Property owners avoid delays.
Building Permit Submission and Approval Process
Our crew submits building permit applications through the right Hays or Caldwell County office. The right office depends on the property's exact location. Uhland spans both counties. Permit needs shift a bit based on which side of the line a property sits. We track approval timelines and follow up directly with county officials. Projects keep moving. San Marcos Custom Concrete manages the whole submission process. Clients don't have to navigate two county systems alone.
Structural Engineering Plan and Review Requirements
We coordinate with licensed structural engineers to produce stamped foundation plans. Each project that requires one gets one. County reviewers check these plans against local soil reports and load math before they grant approval. Our team submits complete paperwork upfront. That cuts down on review delays and follow-up requests. San Marcos Custom Concrete works directly with engineers who know Central Texas expansive clay conditions.
Code-Compliant Slab Thickness and Reinforcement Specs
Our crew builds each slab to meet minimum thickness and steel standards set by local building codes. Home slabs in most cases require at least four inches of thickness. Structural or farm slabs often need five inches or more. Steel specs vary based on slab use and soil class. They also vary by the load the structure will carry over time. San Marcos Custom Concrete documents thickness and steel details on each project. That satisfies inspector needs.